JAINSON – Rotary Switches

Crimping pliers is fitted with jaws so designed to have close metal contact between wires and non-insulated cable terminal ends with capacity from 0.5 mm sq. to 16 mm sq.

Manually operated crimping tool with a rotating die of varying sizes from 6 mm sq. (for Aluminium Cable Terminal Ends & In-Line connectors only) This handy and inexpensive tool is suitable for non-insulated cable terminal ends and connectors. This tool is available with crimping hexagonal profile.

Crimping Plier is fitted with jaws so designed to have close metal to metal contact between wires and non insulated cable terminal ends of capacity from 1.5 mm sq. to 6 mm sq.

Mechanical gear powered hand operated crimping tool with interchangeable Hex type 9 set of dies for capacity 50 mmsq. to 400 mmsq. It is a multi stroke tool with ratchet, pin lock, rapid motion and has a maximum opening of 90 degree This light weight tool weighs approx 4.8 kgs. and is very handy to carry at any remote place for usage. The overall length of the tool is 700 mm and it develops a maximum pressure upto 100 km.

Mechanical Handy Plier Type Tool with interchangeable die sets for compression and sleeves 10 mm sq. to 185 mm sq. It is a single operation tool and is most suitable for crimping at remote places and in trenches too (i.e. for underground cables) This handy tool weights approx. 4.7 kgs. and is very convenient to carry. The epoxy powder coating on the tool protects the same from seasonal effects like rust etc.

Mechanical Handy Plier Type Tool to crimp aluminium tubular terminal ends and connectors upto 240 mm sq. This tool is provided with interchangeable hex pattern 11 set of dies and is most convenient for crimping at remote places and in trenches too (i.e. for underground cables) It is supplied with extension handles to increase the leverage, in turn reducing the manual efforts. The epoxy powder coating on the tool protects the same from seasonal effects like rust etc.

Ratchet hand tool is a professional three in one tool that crimps the three standard pre-insulated terminals Red, Blue & Yellow sizes i.e. 1.5 mm sq., 2.5 mm sq. and 4.6 mmsq. This tool features a adjustment dial with six sections to further enhance the quality of the tool This tool is designed as push to release and close to release

Bench type hand operated crimping tool with 9 set of dies (R-1 to R-10 except R-8) is designed to crimp copper cable terminal ends from 10 mm sq. to 95 mm sq. This tool is having detachable handles with an overall length of 56 cm and weights approx 4.5 kg This tool is guaranteed for one year from the date of supply for any manufacturing defect

Hand operated hydraulic crimping tool with set ring dies is designed to crimp Copper / Aluminium Cable terminal ends upto 400 mm sq. The crimping tool with set of ring dies is designed to crimp copper / aluminium cable terminal ends upto 400 mm sq. The crimping jack and hydraulic pump are connected with a 2 meter length hose pipe and the hydraulic pump are connected with a 2 meter length hose pipe and the hydraulic pump are connected with a 2 meter length hose pipe and the hydraulic pump is having a capacity to develop pressure upto 250 kg./ cm sq. The crimping jack is made from solid special alloy steel to withstand the pressure developed while crimping and safety

Dieless flip-top hand operated hydraulic crimping tools are suitable for cable terminal ends, In-Line connectors, Ferrules & for tension / non tension jointing to AAC & ACSR Conductors from 6 mm sq. to 400 mm sq. respectively